Testing of Materials and Elements in Civil Engineering

This book was proposed and organized as a means to present recent developments in the field of testing of materials and elements in civil engineering. For this reason, the articles highlighted in this editorial relate to different aspects of testing of different materials and elements in civil engin...

Fuld beskrivelse

Saved in:

Bibliografiske detaljer
Format:	Online
Sprog:	engelsk
Udgivet:	MDPI - Multidisciplinary Digital Publishing Institute 2022
Fag:	rock bolt grouting quality dynamic response natural frequency finite element method monitoring historical masonry wall hygrothermal processes internal insulation testing of building materials test uncertainty validation of test methods sustainable test methods recycling foamed asphalt mixtures with cement (FAC) base layer reclaimed asphalt pavement (RAP) fatigue durability GFRP FRP reinforcement shear capacity reinforced concrete beams column stiffness FRCM PBO mesh PBO–FRCM carpentry joints scarf and splice joints stop-splayed scarf joints (‘bolt of lightning’) static behaviour experimental research concrete non-destructive testing ultrasounds ultrasonic tomography acoustic methods defects diagnostic detection convolutional neural networks transfer learning monitoring FBG power transmission tower civil engineering X-ray microtomography microstructure characteristics infiltration damage high-strength concrete steel fibres flexural tensile strength fracture energy numerical analysis concrete floors compressive strength strength distribution industrial floors ultrasound tests ventilated facades large-scale facade model fire safety fiber cement board large-slab ceramic tile plasterboards moisture content hydration processes mechanical properties ultrasound measurements ESD resin expansion joint quasi-plastic material energy absorption asphalt mix compaction index volumetric parameters stiffness modulus moisture resistance roughness texture close-range photogrammetry bond strength random field generation semivariograms hybrid truss bridge steel–concrete connection joint mechanical behavior failure mode strain static test static elastic modulus dynamic elastic modulus machine learning P-wave S-wave resonance frequency test nondestructive method Al–Ti laminate fracture acoustic emission diagnostic pattern recognition clustering AE signal storage systems tab connector flexural test capable design moment restrained ring test autogenous shrinkage cracking concrete cracking test concrete shrinkage cracking test restrined ring calibration cement–fiber boards acoustic emission method k-means algorithm wavelet analysis fiber composites ground penetrating radar (GPR) HMA dielectric constant road pavement thickness estimation early age concrete damage processes detection before loading strength of structures aggregate classification wire mesh roundness tilting angle opening size concrete centrifugation morphology image processing porosity cement waste paper sludge ash (WPSA) controlled low-strength material (CLSM) unconfined compressive strength bearing capacity backfill material P-wave velocity amplitude attenuation resistivity CT scan sandstone damage variable nuclear magnetic resonance spin-lattice relaxometry proton hydration kinetics superplasticizer ready-mixed concrete construction material quality assessment conformity criteria statistical-fuzzy method FRTP rivet connection polyethylene pipe mechanical properties of polyethylene resistance strain computer simulation residual shear stress particle crushing ring shear test particle flow code (PFC2D) frictional work fibre-reinforced concrete recycled steel fibres micro-computed tomography scanning electron microscopy tensile strength reinforced concrete diagnostic testing corrosion carbonation galvanostatic pulse method phase composition analysis X-ray analysis thermal analysis quasi-brittle cement composites low-module polypropylene fibres elastic range digital image correlation Arcan shear test wood orthotropic shear modulus elastic-plastic material shear wave velocity sand bender elements test grain-size characteristics complex modulus shrinkage analysis reclaimed asphalt mineral–cement emulsion mixtures cement dusty by-products (UCPPs) degradation of glass panels effective area ratio relative mass loss visible light transmittance windblown sand wood-plastic composites methods of testing resistance to fungi methods of assessment ground-penetrating radar (GPR) non-destructive techniques (NDT) corrosion of reinforcement slip resistance granite floor slip resistance value ramp test acceptance angle sliding friction coefficient comparability of test methods wall temperature fibre bragg grating sensors freeze-thaw cycles signal analysis short-time Fourier transform fast Fourier transform brine sodium chloride X-ray partition walls brick walls bending strength cracking post-tension cable girder destructive test non-destructive test structural health monitoring safety monitoring fibre Bragg grating mining areas strain/stress distribution geopolymer concrete fly-ash bottom-ash neural network sustainability industrial waste management flexural strength cladding AE acoustic emission micro-events sound spectrum traditional and quasi-brittle cement composites residual-state creep saturation front landslides erosional stability laboratory testing grout mixtures groundwater test apparatus testing building materials elements thema EDItEUR::T Technology, Engineering, Agriculture, Industrial processes::TB Technology: general issues
Online adgang:	ONIX_20220111_9783036518909_591
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Beskrivelse
Summary:	This book was proposed and organized as a means to present recent developments in the field of testing of materials and elements in civil engineering. For this reason, the articles highlighted in this editorial relate to different aspects of testing of different materials and elements in civil engineering, from building materials to building structures. The current trend in the development of testing of materials and elements in civil engineering is mainly concerned with the detection of flaws and defects in concrete elements and structures, and acoustic methods predominate in this field. As in medicine, the trend is towards designing test equipment that allows one to obtain a picture of the inside of the tested element and materials. Interesting results with significance for building practices were obtained.

Testing of Materials and Elements in Civil Engineering

Lignende værker